Chemical Resistant Flooring

Project Overview: Urethane Cement Flooring System w 2505 Sq Ft with Integral Cove Base 300 Ln . Ft & Chemical Resistant Top Coat Our client came to us with what he thought would be a rather difficult task. They needed a floor for the storage room in there new facility. However this storage room needed to be able to not only handle extreme traffic and heavy loads but be able hold up against contaminents and spills due to the items they were storing. Our client sent us over a specification of all the chemicals the floor might be exposed to and our experts were able to cross reference … [Read more...]

Chemical Processing Facility Flooring | Phillipsburg, NJ

Project Area: Chemical Processing Facility Tank Farm Project Size: 4000 sq. ft. Product Used: General Polymers Fastop Hybrid System           This project involved the resurfacing of approximately 4000 square feet for a chemical processing facility in Phillipsburg, NJ. We began our installation by removing all of the loose and delaminated concrete in the main traffic aisle that runs through their tank farm. Once all of the loose material was removed, we patched in all of the delaminations with a urethane cement mortar. Additionally, we installed an integral cove base using the same … [Read more...]

ESD Flooring System

Project Area: Laboratory Clean Room Project Size: 380 Sq ft w/ 70 linear ft Integral Cove Product Used: Dur-A-Flex Armor-Stat ESD            This ESD flooring project involved the application of approximately 380 Sq. Ft. of an electro static dissipative flooring system for a laboratory clean room. We began by removing 3 layers of VCT tile. We also removed some previously installed patching material that was inadequate for our coating system. After all of the tile and patch were removed, we began prepping the floor with diamond grinders. This diamond grinding process removes the … [Read more...]

Chemical Processing Floor Installation | Gloucester, NJ

Project Area: Chemical Processing Area Project Size: 2,000 Sq/Ft Products Used: Sika 22N urethane cement, Sika 31NA urethane cement, engineered concrete           Our client contacted us with a concrete slab that had been badly eroded by a high PH environment and caustic chemical leeching. Because the existing coating was not chemical resistant, the floor beneath it had been badly damaged. Our engineers were consulted to determine the “bad actors” and to ensure that the problem would not return. They specified concrete remediation and a chemical resistant cement urethane product. … [Read more...]

Laboratory Flooring | Parsippany, NJ

Project Area: Laboratory Flooring / Kitchen Flooring Project Size: 7000 Sq./Ft Products: Water-Based Epoxy (GP 3460) / Body Coat Epoxy Resin Glaze (GP 3561) / top coat chemical resistant epoxy (3745) / colored quartz              This project involved installing a colored quartz epoxy flooring system for our client. Our task was to provide the client with a flooring system that could work for both their staff kitchen as well as their in-house laboratory. The concrete substrate on this project was preexisting and required some additional preparation. In the first phase, we prepared … [Read more...]

COPYRIGHT © 2013 High Performance Systems