Project Overview: Concrete Stain and Seal for Apple Cider Production Barn
Conclusion: This two-coat epoxy grind and stain system were installed in less than 72 hours. Knowing the environment when a floor treatment is being installed, allows us the ability to create a specification in your space. In this instance, we added 220 grit white aluminum oxide to create an anti-slip texture while not detracting from its cleanability and head-turning appearance. With a long life expectancy of the industrial flooring system, our client will not have any maintenance issues going forward.
Existing Conditions: Our client had just constructed a brand new Cider Barn and wanted a flooring system that would not only be aesthetically pleasing but would hold up against the corrosive nature of the natural acids and other ingredients involved with making apple cider.
Preparation of existing condition: Since the area, we were working in was newly constructed, the concrete slab we were going over was in pristine shape and did not require the typical patching and crack repair we usually encounter. We applied two different systems in separate areas but the prep work remained the same. We started by diamond grinding both areas to establish a mechanical profile and remove surface contaminants. 70 grit diamond tooling was opted for in our prep phase to minimize deep grooves that might otherwise show. Our typical grinding process would start with a coarse 30 grit to create a deeper profile but it ran the risk of detracting from this stain and seal. Once the grinding was completed, we vacuumed all debris to ensure an adequate bond to the concrete. Our final step was to fill all voids in the concrete caused by abandoned anchor bolts and cut key-ways at a depth of 1/4"’ around all floor and drain hubs to ensure a consistent thickness and finish throughout.
Products Installed: This project included two different areas with their own unique scopes of work. In the back of the barn, which was more focused on production, we applied a standard two coat system using a base-coat of Propoxy - a low odor, 100% solids polymer designed for various conditions and substrates. To topcoat, we used Prothane aliphatic urethane, a low odor, ultra-high solids aliphatic resin designed as a high-performance finish. These products used together are highly resistant to common acids, fuels, grease, salt and Skydrol which was perfect to the cider production area.