• HPS Flooring

Grind and Seal Concrete Floor in Hackensack NJ

Updated: 3 days ago

grind and seal concrete floor NJ

This project was for an autobody shop located in Hackensack, NJ. Our client was looking to reduce their maintenance cost and brighten the workspace. Grind and seal concrete flooring is an economical solution that meets their needs.

warehouse flooring

Here was their existing substrate not in bad shape but was hard to clean. Our epoxy flooring system that we specified will be a cost-effective solution.

In short, we grind the floor fill all voids deeper than 1/2" then apply a high solid epoxy resin and topcoat using an aliphatic urethane to retain sheen and color long term.

Successful Epoxy Floors Always Begins With the Proper Preparation

grinding concrete

This picture depicts our grinding process which includes using the correct tooling for the correct flooring system.

Because this was a coating system we ground the substrate using 70 grit diamond segments so we didn't leave any grooves on the floor.

Upon completion of the grinding process, particularly it is critical to clean the substrate thoroughly being particularly, careful to clean any corners, etc.

A thorough cleaning ensures no peeling of our new grind and seal floor

An Economical Epoxy Floor With A High Quality Appearance

warehouse epoxy floor

Again, grind and seal concrete flooring involves proper preparation and a two-coat system that includes a high solids epoxy coating followed by an aliphatic urethane that most commonly includes an aluminum oxide light broadcast for added nonslip texture.

grind and seal epoxy floor

This flooring system is ideal where clean and neat but more importantly budget is a concern. A typical floor of this type can range anywhere from 1.25 to 5.00 per square foot depending upon the size and overall condition of the substrate. Give us a call today to discuss your needs and how we may be of assistance.


12 views0 comments

Recent Posts

See All