• HPS Flooring

Which is Better, Epoxy or Urethane?

Updated: Oct 7

One of the questions we get most often from facility managers is whether they should install an epoxy or aliphatic urethane floor coating.

Both of these floor coatings work in different ways, perform different functions, and have advantages in different areas.

Both provide protection against chemical corrosion, impact, and scratches/scuffs. They also are long-lasting and simple to maintain, while providing slip resistant qualities to increase safety.

Epoxy Flooring is More Economical

Epoxy is an ideal, economical product for resurfacing concrete surfaces. An epoxy flooring system is a two-part system that results in an extremely hard and durable surface. These flooring systems can be applied in as little as 2 MLs and up to 80 MLs thick, depending on the application, product being used, and the underlying floor surface.

Epoxy Flooring is More Durable

If your work space needs to support heavy traffic, an epoxy coating is shock resistant and helps to protect your facility’s floors both from the long-term impacts of heavy floor traffic as well as driving or even dropping heavy loads.

Epoxy concrete floors come in a variety of colors and textures that can brighten up a facility and define different work areas. In fact, epoxy floors can increase a floor’s light reflectivity by as much as 300% which, can lower utility bills and brighten up the work space.

Epoxy Flooring is Resistant to Water & Chemicals

Additionally, epoxy is amazingly resistant to both water and chemical exposure. If your establishment uses a significant amount of liquids in day-to-day activities, this floor coating stops moisture from leaking into the floor itself, making cleanup easier and protecting the concrete beneath from damage.

Epoxy resin flooring is often used in retail, industrial, and public facilities such as: labs, manufacturing plants, hospitals, schools, malls, and markets. With proper preparation of the underlying concrete, which usually means diamond grinding rather than shot blasting, and expert installation for proper curing and bonding, an epoxy floor is a fantastic choice for most facilities.

Epoxy Flooring Drawbacks

The biggest drawback to epoxy coatings is the installation time required.

The most important step in installing an epoxy floor coating is the surface preparation, and the surface of the concrete has to be thoroughly prepared before the coating can be installed.

This is because the epoxy cannot adhere properly to marginally prepared surfaces, resulting in potential floor coating failure. Additionally, while an epoxy coating is strong, it is not permanent.

Though the floor can withstand heavy impacts, cracking or chipping can occur if an object is too heavy or dropped at certain angles. Epoxies also have little to no UV protection. so if your floor is outside, or even gets sunlight from windows, an aliphatic urethane should be used.

Urethane Flooring Can Protect Against UV Light

Abrasion resistant and more color-retentive than epoxy coatings, urethane cement flooring can last longer and retain their color longer. Urethane is also available in a wide array of colors but can also be applied clear so that existing colors and textures of the floor can show through.

This type of flooring is designed to protect against ultraviolet light and abrasions. If you have an industrial facility that gets a lot of daily use, this floor coating would be a good choice for you. Urethane is not an adjustable thin film floor coating.

Urethane is rolled out at 350 – 500 sf per gallon, which translates to about 2 – 3 mils in thickness — and there is no way to adjust that. Furthermore, urethane does not bond well to concrete, so it is not an ideal coating to apply directly to an existing concrete floor.

Urethane Flooring Is An Excellent Topcoat

However, urethane is an outstanding top coat and sealer for most kinds of epoxy applied over concrete floor coatings. Urethane mortars are ideal for the food and beverage industry because it provides and seamless and smooth floor coating that is moisture and heat resistant.

Urethane Flooring Is Great for Labs or Industrial Settings

Urethane is also great in a lab or industrial setting because it can be chemical resistant. For facilities seeking an ecological floor solution, there are VOC-compliant and odor-free urethanes for many applications.

While the surface preparation process for urethane coatings, in some instances, may not have to be as extensive as for epoxy, the process of installation can still take some time. However, what you are left with is a durable, practically indestructible, long-lasting industrial facility floor.

Urethane coats are considered “wear coats” because they cannot be applied in a thick layer so they wear down quickly and need to be replaced. Typically, you can expect a longer lifespan on an epoxy floor as it can be applied much thicker.

Use Epoxy Floors To Build & Urethane Coatings To Seal

In general, the best approach is to use an epoxy to build up floors and then urethane to seal and protect them. With urethane as a topcoat over epoxy, the floor will outlast unsealed epoxy 3:1 and you will get excellent wear and abrasion results.

However every facility’s needs are unique, depending upon the particular use and desired outcomes. The best way to determine the right floor coating for your facility is to consult with an experienced resinous flooring expert.


139 views0 comments

Recent Posts

See All